MECHDESIGN

 PLOUGH PLANE A plough plane is a plane to make grooves and small rabbets.  It is used to drawer bottoms or rear walls.

PARTS OF VERNIER CALIPER VERNIER CALIPER

PRICK PUNCH PRICK PUNCH The tip of the Prick punch is 40 degree. A prick punch is similar to center punch is used for marking out. Prick punch tip is sharped angled tip to produces a deeper indentation. Prick punch is also known as a Dot punch. CENTER PUNCH CENTER PUNCH Center punch is used to mark the center of a point. It is used for mark the center of the hole when drilling holes. SURFACE PLATE SURFACE PLATE It is flat plate used as the horizontal reference plane for precision inspection.

V-BLOCK V-BLOCK V-BLOCK V-Block is used to hold round metal rods or pipes for performing drilling or milling operation. They consist of a rectangular steel or cast iron block with a 90 degree channel rotated 45 degree from the sides forming a V-shaped channel in the top.

ANGLE PLATE ANGLE PLATE ANGLE PLATE ANGLE PLATE The angle plate is made from high quality material that has been stabilized to prevent further movement or distortion Angle plate is a work holding device used as a fixture in metal working. The angle plate is made from high quality material generally spheroidal cast iron. May be used to hold the work piece square to the table during marking out operations.

TYPES OF SCRIBING BLOCKS SIMPLE SCRIBING BLOCK UNIVERSAL SCRIBING BLOCK POINT SCRIBER

HAMMERS PARTS OF HAND HAMMER CROSS PEEN HAMMER SOFT HAMMER

TAP WRENCH AND DIES SPILT DIE SOLID TAP WRENCH ADJUSTABLE TAP WRENCH DIES AND STOCKS

TAPERS PARTS OF TAPERS TAP PLUG TAP BOTTOMING TAP

REAMERS PARTS OF REAMERS EXPANDING REAMER MACHINE REAMER